Outdoor Patio Misting Mist Cooling Kit Set
Product Description
This Outdoor Patio Misting Kit provides relief from the heat wherever you need it. This pre-assembled cooling system provides mist cooling that cools the surrounding air temperatures by up to 7°. Simply attach the convenient al clips to an umbrella, awning, fence or any other structure, connect it to a standard garden hose , so you can immediately experience the benefit of mist cooling and enjoy an instant refreshing backyard experience. It is also perfect for greenhouse kept plants.
Product Features:
Total : 10 nozzles
1 nozzle / meter
Product Features:
Gray spray nozzle
Pressure: 1.5-3KG
Traffic: 7.5-8.6L / H
Spray radius: 0.6-0.9mm
1. This Outdoor Patio Misting Kit is perfect for cooling your outdoor living areas
2. Easy Installs in less than 10 minutes
3. Perfect cooling/misting solution for greenhouse kept plants
4. Ideal for farmer's markets and gardeners
5. Cools your surrounding air temperatures up to 7 degrees
6. Very easy to use and ultra portable
7. Length : 10 Meters
Features:
1.Great for cooling your outdoor living areas.
2.Can be widely used in plant humidification, cooling, disinfection, dust reduction, landscaping, salt spray test and other artificial fog.
3.No air assistance is required, the system is simple, the spray point is fine, the atomization is sufficient, energy and water saving, low cost and good effect.
Installation Steps:
1.Connect the adapter to the water tap.
2.Turn on the water tap to wash the system for 1 minute to purge the system and remove any impurities.
3.Using cable tie to fixed the pipe.
4.Turn on the tap slightly until jets are working, enjoy the cooling misting system.
5.Turn off the nozzles, keep them dry and clean when you don't use the misting system for a long time.
This advanced mist technology system can be easily attached to patios, gazebos, tents, greenhouses, umbrellas and more.
Allowing a cooling escape for the whole family.
All you need is a water source. No electricity required.
Features:
Non-drip nozzles
Hardware included
Continuous stream
Superfine mist which
Cools the temperature down by around 30ºC
Ideal to keep you cool in the summer heat
Images are for display purposes only
Specifications:
Material: PP+ABS
Color: As the Pictures Shown
Water Spray Diameter: 80cm/ 31.50inch
Hose Outer Diameter: 7mm
Hose Inner Diameter: 4mm
Hose Length: 10m/393.7inch
Wide Applications
Ideal for flowers, plants, bonsai and potted fruit, patio drip irrigation. A perfect garden watering kit for family homes, hotels, clubs, offices patios, greenhouses, gardens, lawns, and other plants of intelligent care.
Easy Installation
Simple installation without digging or plumbing skills, simply insert the fittings and sprayers, you can begin watering your plants instantly.
How to Use:
1. Cut the water pipe according to the length you need.
2. Attach tee with the atomizing nozzle.
3. Attach an end closure when you finish all atomizing nozzles’ installation.
4. Attach the pipe to tubing quick connector with the tee.
5. Attach the tubing quick connector with the universal connector.
6. Attach the system to Faucet and place the installed spray near your plants.
- Delivery is on the same day if ordered before 6:30 pm
| Size |
10 meters, 15 meters |
|---|
